Shed Opening
Patterning mechanisms in dobby and jacquard looms use reciprocating bars to raise selected warp yarns to create a passage for the weft carrier. The knife stroke determines the height of this opening and must be calibrated to ensure the weft carrier does not strike the warp threads. This linear movement is driven by adjustable eccentric cams mounted on the loom’s main drive shaft.
Yarn Tension
Linen warp yarns have low elongation and are sensitive to excessive stretching during the opening of the loom shed. A longer knife stroke increases warp yarn tension, which raises the risk of thread breakages during high-speed production. Keeping this parameter to the minimum height that still allows reliable insertion of the weft prevents yarn damage.
Mechanical Adjustment
Weave pattern changes often require altering the shed geometry to accommodate different yarn counts or reed densities. The knife stroke is adjusted by moving the connecting rod pin along the slotted drive lever to increase or decrease the throw. This adjustment is documented in the loom setup card and must be verified before starting a new fabric batch.
Proper setting prevents the heald frames from colliding with the top structure of the loom during operation.