Biological Modification
Controlled removal of the natural adhesive compounds in the flax stem allows for the release of high-quality textile fibres from the woody core. During the retting process, flax pectin degradation occurs through the action of fungal and bacterial enzymes that digest the calcium pectinate binders. This biological action determines the ease with which the fiber bundles can be separated during subsequent scutching and hackling.
The daily progression of this enzyme activity is documented in the retting lot registry.
Chemical Breakdown
Industrial chemical retting offers an alternative method that uses chelating agents and hot alkaline solutions to speed up the process. When flax pectin degradation is conducted chemically, the temperature and pH must be managed to avoid damaging the crystalline cellulose regions of the fibre. If the treatment is too aggressive, the fibres will become brittle and lose their elasticity, leading to high waste during spinning.
The chemical consumption and bath temperature are recorded on the wet processing sheet, providing a historical log that helps technicians adjust the treatment for different crop years.
Processing Outcome
Over-retting is the primary risk associated with this degradation stage. If flax pectin degradation proceeds beyond the middle lamella of the bundles, it begins to separate the individual elementary fibres, which reduces their commercial value. This condition is tracked using the water retention test and raw fibre hand assessment.
The run must terminate when the scutching yield reaches its optimal percentage.