Pinning Refinement
Final pin passings on a multi-head hackling machine remove residual shive particles and short fibres from flax stricks. The application of dense combing utilizes closely spaced pins on rotating aprons to refine the parallel alignment of line flax. A mill process sheet specifies pin density per centimetre for final hackling stages prior to strick sorting.
Inadequate pin density leaves coarse fibre clusters that disrupt sliver uniformity during drawing.
Action Intensity
High pin counts per unit area increase frictional drag on the passing flax mass, which extracts unretted bark fragments and loose tow. During dense combing, fine steel pins penetrate deep into the strick core to separate coarse ribbons into delicate line flax bundles. Operational logs record pin wear rates and bar replacement intervals to maintain uniform penetration depth across all hackling heads.
Excessive pin density damages fine ultimate fibres, generating unnecessary short fibre waste and reducing line flax output ratios. Mill acceptance standards balance fibre fineness targets against tow generation limits.
Operational Ceiling
Mechanical pin interaction ends when hackled stricks leave the final hackling bed and move to the spreadboard feeder. Subsequent drawing frames rely on drafting rollers rather than pin beds to draft the formed sliver.