Optical Balance
Luminous distribution across the inspection surface defines the reliability of manual and digital fabric grading. Maintaining cross web lux uniformity ensures that a technician identifies weft mispicks or contamination at the selvedge as easily as at the center of the roll. This metric describes the deviation between the brightest and dimmest points measured by a light meter during the start of every shift.
Illumination Standard
Proper lighting levels for linen inspection require a steady output from overhead fixtures to prevent eye strain and missed faults. The cross web lux uniformity of a system is verified using a grid of points mapped onto the inspection perch before any high speed winding begins. If the outer edges of the fabric receive ten percent less light than the center, the inspector often fails to detect small neps or broken filaments in the perimeter.
Correcting this imbalance involves adjusting the angle of reflectors or adding auxiliary side lamps to ensure the entire width meets the lumen target. A failure in this synchronization of light leads to false passes and inconsistent batch quality.
Consistency Protocol
Quality control logs record the specific values found during the calibration of the viewing area. Achieving high cross web lux uniformity reduces the risk of buyer rejections based on perceived color shading variations that are actually lighting artifacts. The protocol demands a minimum brightness level across the entire width to maintain the integrity of the final inspection report.
When light levels drop below the threshold, the machine stops until the operator replaces the failed lamp.