Frictional Resistance
Inter-fibre friction is measured against the tensile load required to separate a sliver or roving without breaking individual filaments. High levels of cohesive tenacity are necessary to prevent the material from drifting or breaking under its own weight during the spinning process. This resistance is a function of fibre length and surface roughness.
Drafting Control
Measurement of this force typically involves a modified tensile tester that records the peak load during a slow separation of the sliver. Because flax fibres are naturally smooth the cohesive tenacity is often lower than that of wool. Mills manage this by adjusting the twist multiplier in the roving or by controlling the temperature of the spinning room.
Processing Consequence
Insufficient grip between fibres leads to uncontrolled drafting and the creation of thin spots in the yarn. If the cohesive tenacity is too high the drafting rollers will fail to slide the fibres past one another which causes thick clumps or machine stoppages. Adjusting the lubricant application during the finishing of the sliver allows the mill to hit the specific cohesive tenacity required for fine count yarns.
This balance is particularly important in wet spinning where the water softens the pectic substances and changes the surface friction of the flax.