Rupture Magnitude
Tensile strength measurement quantifies the total energy required to rupture a specific mass of flax fibres under controlled laboratory conditions to determine the commercial grade. A precise bundle breaking force reading provides the most reliable indication of the structural integrity of the raw material before it enters the high speed spinning line and undergoes mechanical drafting. Results are recorded in kilograms.
Specimen Preparation
Operators mount a flat ribbon of fibres in a dedicated tester with a specific gauge length. Correct bundle breaking force depends on the uniform tensioning of every single fibre during the initial clamping phase. If the fibres are not parallel the test results will show artificially low values.
Grading Utility
Suitability for high speed wet spinning is dictated by results from this test. A low bundle breaking force often signals over-retting or biological damage to the cell walls which prevents the production of fine yarns. Higher values permit the use of greater draft ratios during processing without causing excessive downtime.
When the mill receives a shipment of scutched flax the laboratory compares the bundle breaking force against the purchase contract to ensure the material can withstand the mechanical stresses of the hackling machine.