Defect Classification
Structural irregularities in woven linen textiles often arise from systematic variations in the physical properties of the input yarn. Woven fabrics that display localized horizontal streaks or shaded stripes across the weft direction often contain bare yarn barré bands, which are caused by physical discrepancies in the raw material before any dyeing or finishing occurs. These density and diameter variations originate from uneven draft or tension during the spinning process of the linen fiber.
The defect becomes fixed during the weaving stage and can be measured by optical inspection or light-transmission testing of the gray goods. In most cases, these bands are not visible until the fabric is held under tension.
Mechanical Origin
Variable tension across the creel or unstable draft in the wet-spinning frame produces cyclic thickness changes in the linen yarn. When bare yarn barré bands are formed, these cyclic variations create localized density bands that run parallel to the weft. If the yarn is woven under non-uniform let-off or take-up tension, the visual effect of these variations is amplified across the width of the loom.
Spinning mills track these variations using yarn uniformity testers to prevent them from reaching the weaving room.
Fabric Appearance
Finished fabrics that contain these density bands cannot be corrected by standard chemical treatments. Gray cloth shows these bands when held against a back-light, which shows the varying light transmission through the tighter and looser pick zones. The severity of the band defect dictates whether the material is accepted or rejected.