Loom Geometry
Loom settings determine the path and tension of warp yarns during weaving. The back-rest roller offset defines the physical distance by which the back-rest roller is positioned away from the standard neutral plane. When set correctly, it alters the path of the yarn sheet to balance tension between the upper and lower sheds.
This position dictates how the warp yarns respond to the opening of the shed.
Tension Regulation
Weaving mills adjust the position of the back-rest roller to control warp tension during the insertion of the weft. Moving the roller vertically creates an asymmetric shed where the top and bottom warp sheets experience different tension levels during shed opening. This asymmetry helps in weaving heavy linen fabrics by loosening the yarn in the top shed while keeping the bottom shed tight.
A higher vertical position reduces the yarn tension during the beat-up process, preventing yarn breakage. Horizontal movement of the roller changes the length of the yarn between the lease rods and the back-rest. This alteration determines how much the warp stretches as the heald frames move.
If the tension is too high, yarn fatigue causes frequent stoppages on the loom floor.
Structural Consequence
Fabric density and hand feel depend directly on the yarn alignment achieved during beat-up. Modifying the displacement of the roller changes the cover factor and appearance of the woven linen cloth. Adjustments made to this roller offset prevent yarn friction and hairiness.
Inadequate offset leads to uneven fabric surfaces and structural defects in the finished linen piece.