Definition Section
Pneumatic drying assemblies deliver a continuous high-velocity sheet of air to strip surface liquids from moving webs. Industrial air knives operate at the exit of wet finishing baths or bleaching ranges to remove excess chemical solutions before the fabric enters a stenter frame. This mechanical shearing action displaces water more efficiently than heat alone.
Fluid Stripping Profile
Blower systems generate a pressurized stream through a precision-slotted orifice to create a laminar flow that follows the cloth surface. The narrow gap maintains air velocity across the full width of the linen web. When the stream hits the saturated fibres, it creates a pressure zone that physically pushes liquid away from the substrate.
This process prevents the migration of dyes or finish chemicals that occurs during slow evaporative drying.
Moisture Threshold
Effective liquid removal depends on the distance between the orifice and the fabric surface. If the gap is too large, the air stream loses the kinetic energy required to overcome the surface tension of the water. High-density linen fabrics with tight weaves require higher pressure settings than open scrims to reach the desired moisture regain levels.
Excessively high velocities can cause edge fraying or surface disturbance in delicate flax blends.