Separation Process
Mechanical separation zones on sizing machines split damp warp yarn sheets into individual yarn ends before final drying takes place. The wet-splitting zone separates wet-sized flax yarns immediately after emerging from squeeze rollers and entering drying cylinders. Sized flax warps carry high chemical size liquid and tend to stick together, forming bonded yarn arrays.
Lease rods placed in the damp yarn path force adjacent warp ends apart while size film is still wet and pliable. Splitting yarns before drying prevents film tearing and fibre breakage that occur when dried, fused yarns are pulled apart at the dry splitting section.
Yarn Integrity
Premature separation of damp warp ends reduces hairiness by laying down surface fibrils while size remains fluid. Operating the wet-splitting zone correctly preserves film continuity around individual flax yarns before thermal drying hardens the chemical coating.
Drying Efficiency
Separated yarn ends allow uniform hot air circulating and steam contact across individual yarn perimeters on cylinder dryers. Warps that enter drying cans without wet separation exhibit uneven drying rates, leaving damp yarn cores that foster mildew during storage. Mill technicians set split rod distances based on warp density and sizing liquor viscosity to maintain clean separation.
Proper wet-splitting zone positioning ensures smooth warp shedding and reduced yarn friction during weaving operations.