Weft Curvature
Structural waviness parameters define the geometric bending ratio of weft yarns as they interlace over and under warp ends in a woven fabric. The transverse crimp measures the percentage difference between the unraveled straight length of a weft yarn and its length while embedded inside the woven linen web. Weft yarn bending depends on yarn count, warp tension during weaving and chemical finishing treatments.
Textile testing laboratories quantify this parameter to evaluate fabric extensibility and dimensional stability under lateral load.
Structural Interlace
Weaving and finishing processes alter thread geometry through mechanical tension and aqueous swelling. Higher transverse crimp increases lateral fabric stretch and tear strength while lowering weft direction initial modulus. During Sanforizing and wet finishing, moisture absorption causes flax fibers to swell transversely, inducing yarn crimp redistribution between warp and weft systems.
Technicians determine crimp values by removing weft yarns from fabric samples, straightening them under standard tension, and recording length changes on crimp testers. Test results guide weaving shed settings, including warp shed opening timing and weft insertion tension adjustments. Precise crimp control prevents uneven web shrinkage during garment manufacturing.
Fabric Elasticity
Commercial specification sheets list yarn crimp percentages alongside thread density and fabric weight figures. Imbalance between warp crimp and transverse crimp causes diagonal fabric distortion and garment seam puckering. Laboratory test reports confirm crimp balance prior to bulk shipment release.