Linear Density Calibration
Calibration of the linear density of yarn is necessary during spinning to meet buyer specifications and international standards. A tex count adjustment is the process of altering the draft ratio or drawing speed to correct the mass per unit length of the spun yarn. In linen spinning, where flax fibers can have varying moisture and fiber bundle thickness, this adjustment is performed to keep the yarn within allowable tolerances.
If the measured count is too high, the yarn is too thick, and the draft must be increased. These changes are typically calculated based on daily laboratory tests of yarn packages. Testing is conducted under standard atmospheric conditions to ensure that the natural moisture of the flax does not distort the mass measurements and lead to incorrect adjustments.
Draft Regulation
Regulating the speed ratio between the feed rollers and the delivery rollers is the primary method for making these corrections. The tex count adjustment modifies this ratio to either draw out the fibers further or allow more mass into the yarn. Modern wet-spinning frames use electronic drafting systems that can adjust this ratio on the fly based on sensor inputs.
These systems reduce the time required to make the adjustment and prevent the production of off-count yarn. Accurate adjustments are necessary to prevent yarn from being rejected by the fabric maker.
Weft Density Influence
Fabric weight and weft density are directly affected by the linear density of the yarn used. When a loom is set up for a specific tex count, any deviation causes the fabric to become too heavy or too light. Processing mills require yarn with a consistent count to ensure that the fabric has the correct weight and drape.
Consistent adjustments at the spinning frame help maintain this quality across different production runs.