Fiber Alignment
Feeding long scutched flax fibers onto a moving bed of metal pins achieves the initial parallel orientation required for yarn preparation. This mechanical process, referred to as spreadboard drafting, draws out the overlapping fiber bundles into a continuous, uniform stream. Spinning facilities utilize this stage to blend different fiber lots.
Sliver Formation
Continuous drawing actions between the slowly moving faller pins and the rapidly rotating delivery rollers elongate the fiber assembly. During spreadboard drafting, the metal pins hold the longer fiber groups back while the rollers pull the loose fibers forward. This action prevents the fibers from clumping together and forming thick places in the resulting sliver.
The output is a highly uniform sliver that can be fed directly into the subsequent drawing and doubling frames.
Control Parameters
Mechanical settings on the drafting board must be adjusted according to the average length of the raw flax being processed. The distance between the retaining roller and the drawing roller, known as the ratch, must exceed the longest fiber length to prevent breakage. Operating the draft at too high a ratio causes fibers to slip out of control, resulting in an uneven sliver.
Technicians monitor the draft ratio, which is typically set between ten and fifteen, to ensure optimal fiber control. When this ratio is calibrated correctly, the coefficient of variation in sliver weight remains within acceptable limits for subsequent processing stages.