Fiber Lubricant
Chemical processing emulsions are applied to synthetic or natural yarns during the final spinning stages to reduce friction and static electricity. This specialized liquid coating, known as spin finish, coats each strand to improve yarn cohesion and prevent filament abrasion on high-speed winding machinery. The mixture usually contains antistatic agents, lubricants and emulsifiers that wash out easily during subsequent fabric finishing.
Treatment Phase
Coating of the yarn occurs immediately after the spinning nozzles or the draft rollers of the ring frame. The dosage of the spin finish is recorded on the yarn finishing log of the mill. While the mill’s internal process requires a minimum coating to prevent yarn breakages, the buyer’s acceptance criteria limit the residual extractable oil content to prevent yellowing of the yarn during storage.
Downstream Impact
Residual chemical coatings can interfere with the wetting out of the fabric during the weaving and dyeing processes. If the emulsion is not completely removed during scouring, it can cause resist spots where dyes cannot penetrate the yarn. The quality department conducts extraction tests using organic solvents to verify that the finish has been applied uniformly and can be easily washed out by the dyeing plant.
Proper formulation of the spin finish is therefore necessary to protect both high-speed spinning operations and the quality of the finished woven fabric.