Yarn Extension
Tension applied during the wet sizing process causes the warp yarns to lengthen before they are dried and wound onto the loom beam. This sizing stretch must be kept to a minimum to preserve the natural elasticity of the flax fibres. If the yarn is pulled too tightly while wet, it will lose its ability to stretch during loom operations.
Draft Control
Adjusting the speed ratios between the draw rolls and the drying cylinders is the primary method of managing yarn elongation. Excessive sizing stretch weakens the linen yarn by pulling the flax fibres past their elastic limit, which leads to frequent warp breaks on the loom. Since flax has a low elongation at break compared to cotton, even a small error in tension can ruin a complete warp sheet.
Operators use electronic tension sensors and variable speed drives to keep the stretch below one percent during the entire run.
Elasticity Loss
Preserving the residual elongation of the sized yarn ensures that it can withstand the sudden shedding and beat up motions of the loom. A controlled sizing stretch results in fewer machine stoppages and higher loom efficiency in the mill. Technicians measure the yarn length before and after the sizing process to calculate the exact stretch percentage.