Membrane Surface Accumulation
Deposition of suspended solids and dissolved minerals on the surface of a filtration barrier reduces the efficiency of the water treatment process. In the context of linen production, reverse osmosis fouling occurs when the organic matter or salt from the process water adheres to the membrane. This buildup creates an additional layer of resistance that the water must overcome to pass through the system.
The type of foulant depends on the source of the feed water and the chemicals used in the upstream spinning or weaving processes.
Operational Flux Decline
Reduction in the volume of purified water produced per hour indicates that the filtration elements are becoming clogged. When reverse osmosis fouling progresses, the mill must increase the feed pressure to maintain the required output of soft water for the dye house. This increase in pressure leads to higher energy consumption and places mechanical stress on the pump seals and the membrane housings.
Monitoring the normalized permeate flux allows the operators to detect the onset of fouling before it causes a complete system failure. If the flux drops by more than fifteen percent, a cleaning cycle is initiated.
Cleaning Cycle Requirement
Periodic application of acidic or alkaline chemicals restores the permeability of the membrane by dissolving the accumulated layers. The choice of cleaning agent depends on whether the reverse osmosis fouling is primarily mineral scaling or biological growth. For linen mills, alkaline cleaners are often used first to remove organic films followed by acid washes to remove calcium deposits.
This procedure must be performed carefully to avoid damaging the delicate polyamide layer of the membrane. Effective cleaning extends the operational life of the membranes and ensures a reliable supply of high purity water for the finishing mill.