Colorimetry Standard
Paired neutral grey chip scales quantify visual color changes and shade transfers occurring in textile colorfastness testing. Laboratory technicians determine grey scale fastness by comparing tested linen swatches against unexposed control samples under standardized lighting. The rating scale spans from Grade 1, representing severe color alteration, to Grade 5, representing zero visible contrast.
The testing protocol applies strictly to surface color change and cross-staining assessments, excluding total fabric degradation analysis.
Staining Assessment
Colorfastness procedures subject dyed linen fabrics to washing and rubbing testing inside controlled laboratory vessels. Adjacent multi-fiber fabrics sewn onto the test sample absorb bled dyes during laundering cycles. Inspectors place the washed adjacent fabric alongside an unexposed multi-fiber strip under a D65 daylight lamp.
Visual comparison against the grey scale for staining yields the numerical grey scale fastness score for that specific fiber type. A half-step rating such as 4-5 indicates intermediate fastness between major scale steps. Export agreements for printed linen goods demand minimum ratings of Grade 4 for domestic washing stability.
Low fastness ratings indicate poor dye fixation or inadequate washing-off stages during textile finishing.
Wash Toleration
Mill laboratories maintain standardized grey scale chips to ensure consistent visual evaluation across shift inspectors. Test logs record grey scale fastness values for each production batch before release. High fastness ratings confirm color stability under commercial laundering conditions.