Greige Evaluation
Fibre inspection occurs when raw linen goods are assessed for mechanical defects and consistency before undergoing chemical processing or dyeing. A greige audit evaluates the physical integrity of loom-state fabric to identify irregularities that would otherwise appear once colour is applied. This inspection happens immediately after the weaving stage and before the fabric enters the finishing department.
The inspection report documents findings like width consistency, yarn count uniformity, and the density of the weave.
Acceptance Protocol
Performance standards dictate whether a specific lot moves forward into wet processing or requires secondary handling. Buyers set internal tolerance levels for tension streaks and yarn breaks that the supplier must meet to pass the check. Mill personnel compare these observations against the agreed technical specifications provided at the start of production.
If the measurement falls outside the established range, the batch stays in the grey state until corrective actions occur. A primary objective involves preventing the loss of resources that results from finishing cloth with latent structural flaws.
Measurement Scope
Technical documentation governs the boundary between raw material assessments and finished product quality. Grading criteria distinguish between fibre-level characteristics like staple length and fabric-level defects such as knots or oil spots found in the finished weave. This process identifies potential failures in the spinning or weaving machinery rather than environmental conditions of the flax field.
Proper verification confirms the readiness of the loom-state product for downstream operations. Reliable records from this stage allow for accurate traceability through the entire supply chain.