Output Calculation
Volumetric recovery calculations track the net linear meters of usable cloth produced per unit weight or grey fabric length following wet processing operations. Linen finishing mills in Jiangsu record finished metre yield on dye house batch tracking sheets after stenter drying and sanforizing. This metric measures the conversion efficiency of loom-state fabric into commercially shippable finished cloth.
Raw grey cloth shrinks significantly during scouring and bleaching, which reduces overall linear length while increasing aerial weight. Mill standards establish target yield ratios based on weave density, yarn count and specific finishing sequences. Buyer contracts specify minimum yield thresholds to ensure ordered linear quantities match finished delivery allocations.
Dimensional Change
Width reduction and warp contraction alter fabric geometry during aqueous processing. High temperature washing causes relaxed flax yarns to swell, pulling warp threads closer together while shortening overall fabric length. Processing facilities measure fabric dimensions before entering the stenter frame and immediately after batch cooling.
Deviation from target linear yield indicates improper overfeed settings or excessive tension during drying. Fabric weight per square meter increases proportionally as linear yield decreases, altering the technical specifications of the finished material.
Commercial Settlement
Discrepancies between loom-state fabric input and final output generate inventory variance during billing reconciliation. When finished metre yield falls below contractually agreed allowances, processing facilities must account for length loss attributable to process instability. Commercial invoices reference final certified yardage logs rather than initial grey cloth receipts.
Payment settlements adjust for mill shrinkage beyond standard tolerances, establishing clear accountability between grey cloth suppliers and textile converters.