Drafting Control
Gill box operations require continuous physical contact between moving pin bars and thick fibrous slivers to maintain parallel alignment. The depth of this engagement is governed by faller pin penetration during high-speed drafting phases. Mechanical beds push steel pins into moving flax beds to control short fibre movement.
Control boundaries stop at the front drafting roller where pins retract from the drawn strand.
Mechanical Action
Faller bars drive steel pins vertically into incoming flax slivers as the bed moves forward between drafting rollers. Correct penetration depth ensures that individual pins penetrate the entire sliver thickness without contacting the lower guide plate. Insufficient faller pin penetration permits inner fibres to float uncontrolled through the draft zone, causing thick sliver patches.
Excessive penetration forces pin tips against metal bed tracks, accelerating pin wear and bending fragile steel tips. Mill technicians adjust bed heights using screw jacks to calibrate pin entry depth for varying sliver weights. Pin density and insertion angle work together to maintain uniform restraint force across heavy slivers.
Fibre Damage
Improper engagement depth cuts long bast fibres and increases nep formation during mechanical drafting. Suboptimal faller pin penetration reduces drafting tenacity and causes high sliver irregularity. Maintenance schedules require daily inspection of pin straightness to prevent fiber accumulation.