Fibre Shear
The dual-clamp cutter operates within the preparatory sorting stage of flax processing in Chinese textile mills, where long line fibres undergo mechanical preparation prior to spinning. Technicians position the continuous bundle between two opposing pneumatic vices before a high speed circular blade descends to sever the material. This specific dual immobilization prevents the lateral displacement of individual strands, which would otherwise introduce length variation into the downstream drawing frames.
Mill supervisors record the resulting sample lengths in the daily bale inspection register to verify that the harvested crop meets the physical tolerance specified by the spinning department.
Blade Tensioning
Maintaining exact perpendicularity during the descent requires periodic calibration of the opposing jaw pressure against the stationary cutting anvil. Operators adjust the pneumatic regulators until the clamping force matches the resistance threshold defined in the internal mill standard for medium grade retted flax. Excessive pressure crushes the central lumen of the plant stem, whereas insufficient tension allows slippage that produces skewed fringe ends on the combed sliver.
Each adjustment is checked using a steel feeler gauge before the morning shift begins production on high value export yarns.
Quality Threshold
Fabric grade evaluations conducted downstream depend directly on the uniformity achieved during this preliminary mechanical sizing operation. Yarn irregularity measurements taken on the final woven cloth reflect the baseline consistency established by the initial fibre division process. Buyers establish strict acceptance criteria for tensile strength and appearance, which differ significantly from the internal mill parameters used by plant technicians during day to day operations.
Failure to maintain precise dimensional control at the cutting head introduces weak points that ultimately cause warp breakage during high speed weaving on automated air jet looms.