Contractual Standard
Written business agreements between textile manufacturers and specialized sizing processors define the chemical and physical parameters of warp yarn treatment. Under a typical commission sizing agreement, the processing mill commits to applying a specific protective starch or synthetic polymer coating to the buyer’s warp yarns. This document ensures that the treated yarn possesses the tensile strength and abrasion resistance required for high-speed loom operation.
Operational Requirement
Technical specifications in the document detail the target pick-up percentage, the moisture content, and the specific chemical composition of the sizing liquor. Adherence to the commission sizing agreement is monitored through laboratory testing of yarn samples before and after the sizing process. If the size pick-up is too low, the yarn will suffer from excessive hairiness and clinginess during loom operation, while excessive size causes brittleness and shedding.
The agreement therefore establishes narrow tolerance bands for both tensile strength and elongation.
Quality Acceptance
Loom operators inspect the sized warp beams upon delivery to confirm compliance with the agreed physical properties. Any deviation from the parameters established in the commission sizing agreement can result in warp beam rejection or a demand for re-processing at the sizing mill’s expense. Successful execution of the agreement guarantees consistent loom efficiency and minimizes fabric defects in the final manufactured linen.