Insertion Cycle
The insertion sequence facilitates the movement of the filling yarn from the donor gripper to the receiver gripper at the midpoint of the loom width. A center transfer handover occurs when the two rapier heads meet at their maximum extension to exchange the yarn end. Accuracy in this exchange is required for preventing missed picks or yarn breakage during high-speed production.
Mechanical Timing
Electronic synchronization ensures that the opening and closing of the gripper clamps happen within a narrow millisecond window. During a center transfer handover, the donor rapier releases the yarn precisely as the receiver rapier secures it through mechanical or pneumatic actuation. Errors in this timing result in weft loss or the creation of small loops in the fabric center.
Tension Control
Uniform tension must be maintained as the yarn moves across the shed to avoid fabric defects like tight picks or shiners. The center transfer handover subjects the flax yarn to a momentary change in direction and velocity that must be managed by the pre-winder and tensioning units. Consistent handover performance reduces the need for machine stops and improves the overall efficiency of the linen weaving process.
Fine adjustments to the gripper pressure allow the system to handle different yarn counts without damaging the fibres. This transition point represents the most sensitive stage of the entire weft insertion sequence. Successful execution of the swap is necessary for producing flawless high-count linens.