Electronic Monitoring
Electronic monitoring of running yarn density is performed during winding to identify thick and thin regions that degrade fabric quality. A capacitive mass sensor measures changes in electrical capacitance as the yarn passes through a high-frequency electric field between two metal plates. This signal is proportional to the mass of the fiber bundle present in the sensing zone, allowing the system to compute the linear density.
In linen spinning, where moisture content and fiber irregularities are high, these sensors must be carefully calibrated to avoid false cuts. This measurement helps spinning mills maintain strict quality control across different batches of flax yarn. By analyzing the high-frequency capacitance changes, the system can also map the short-term mass variation and output a detailed spectrogram that identifies periodic errors caused by defective draw rollers.
Calibration Method
Environmental humidity alters the dielectric constant of bast fibers and affects the sensor output. To prevent incorrect mass readings, the capacitive mass sensor uses automatic compensation algorithms that adjust for slow drifts in temperature and moisture. These adjustments ensure that the sensor only reacts to rapid changes caused by slubs, spin errors or piecing knots.
Modern winding machines use these calibrated baselines to guarantee that the clearing limits remain consistent throughout the day.
Sensor Limitations
Conductive impurities or excessive water on the yarn can disrupt capacitive readings and cause the clearer to make unnecessary cuts. For very wet linen yarns, optical sensors are sometimes preferred because they are unaffected by moisture variations. However, capacitive sensors remain highly reliable for dry-spun yarns where mass variation is the main source of defects.
Choosing the correct sensor technology depends on the spinning method and the final moisture level of the yarn.