Structural Defect
A discontinuity in the interlacing of warp and weft occurs when a single yarn snaps under tension during the weaving process. This broken end appears as a gap or a loose tail in the fabric surface, disrupting the uniform appearance of the linen weave. Standard inspection protocols require the identification of the faults before the cloth leaves the loom.
Production Impact
Tension variations in high speed looms often cause the fine flax yarns to fail at points of local weakness. When a broken end happens, the loom sensors typically trigger an immediate stop to prevent a long streak of missing yarn. Operators must manually tie the yarn or thread it through the reed and heddles to resume operation.
Quality control systems track these incidents per hundred meters to determine the efficiency of the spinning and weaving stages.
Grading Criteria
Fabric assessment follows a point based penalty system where the length and frequency of the fault determine the final classification of the bolt. A repaired break incurs a minor penalty. An unrepaired gap extending several centimeters results in a major defect.
Manual inspection reveals every break. Export standards for premium linen typically allow only a specific number of these faults before the entire roll is downgraded to secondary quality or rejected. These faults directly influence the commercial value and the cutting yield for garment manufacturers.