Hydration Benchmark
Standardized equilibrium regain values govern the mass calculations of incoming baled flax fibre prior to mechanical opening. Purchasing contracts for Chinese wet spinning mills specify a baseline moisture target of twelve percent by weight to stabilize fibre yield calculations. Fibre stored above this moisture boundary risks micro-organic degradation, while dry fibre under six percent becomes brittle during drafting and generates excessive fly waste in the card room.
The metric sets the neutral reference weight from which commercial invoicing adjustments occur during raw material intake.
Process Deflection
Water content inside stored flax bales fluctuates according to atmospheric humidity and ocean transit conditions from European scutching facilities. When raw material shipments arrive at Chinese ports, laboratory technicians extract core samples from five percent of the bales to record dry mass through thermal drying ovens. Scutching mills and spinning plants recalibrate roller pressures and drafting zone relative humidity based on the deviation between measured moisture and the baseline moisture target.
High moisture levels increase fibre friction against drafting aprons, causing irregular thick places in roving yarns. Low moisture levels decrease cohesive forces between individual long flax fibers, causing drafting waves and frequent yarn breaks at the spinning frame. Technicians maintain controlled air conditions in the carding room to pull the fiber regain back toward equilibrium before drafting begins.
Invoice Settlement
Commercial payments depend directly upon clean dry weight adjusted for standard moisture regain. A shipment delivered with fourteen percent moisture contains two percent excess water weight, triggering a price deduction against the gross bill of lading weight. The baseline moisture target acts as the zero-adjustment line in raw material contracts.
Sellers do not receive bonuses for dry fibre shipments unless explicitly stipulated in trade addendums.