Photometric Reference
Standardized background light intensity value measured across an unblemished fabric substrate establishes the reference signal for high-speed line-scan cameras on automated grey linen inspection frames. Calibration algorithms log baseline luminance prior to weaving runs to account for variations in illumination source aging and ambient mill lighting. The optical metric defines the signal floor against which localized variations in light transmission or reflectance are evaluated.
If ambient conditions shift during continuous operation, adaptive threshold adjustments maintain signal fidelity without altering the original baseline value recorded during system setup.
Exposure Calibration
Optical sensors capture greige linen web movement under backlighting or diffuse front lighting at rates exceeding one meter per second. When greige linen transitions between different yarn counts or warp densities, light attenuation across the unblemished cloth shifts predictably. System controllers recalculate expected optical response curves while preserving the original baseline luminance setting, allowing the machine vision software to differentiate between uniform fabric density transitions and true structural defects such as thick ends or yarn contamination.
Flax fibres contain natural shade variations across raw batches, which can cause minor, broad-area luminance fluctuations that must not trigger false defect calls. Consequently, vision systems set narrow tolerance bands around baseline luminance to prevent minor dye-lot or retting shade shifts from being misidentified as physical structural flaws.
Signal Thresholding
Substrate opacity dictates signal boundaries. Dark slubs and foreign matter cause sharp drops in transmitted light below baseline luminance values, whereas open reed marks and broken picks generate pronounced light spikes. Machine software converts these photo-diode voltage variations into digital greyscale values from zero to two hundred fifty-five.
Physical inspection certificates generated for export lots record baseline luminance calibration logs alongside total defect counts to verify that automated defect detection operated at standard sensitivity throughout the production roll.