Tension Control
Warp tension dynamic regulation balances the cyclic tension variations produced by the opening and closing of weaving sheds. Loom back rest rollers move in synchronized motion with the reed to maintain constant warp tension during shedding. Back rest oscillation describes the controlled pivot movement of the back rest roller that compensates for path length changes in flax warp yarns.
Mill setup sheets log back rest position parameters for every fabric quality change. Flax yarns exhibit low elasticity, requiring exact tension compensation to prevent warp end breaks.
Mechanical Movement
Eccentric cams or spring-loaded lever systems drive the motion profile of the back rest assemblies during shedding cycles. As shed opening increases path length, the back rest roller tilts forward toward the heald frames to release stored warp length. When the shed closes for pick insertion, spring pressure draws the roller backward to take up excess slack in the yarn sheet.
Improperly adjusted dampening springs create erratic roller bouncing at high loom operating speeds. Heavy linen constructions demand larger oscillation amplitudes than lightweight plain weave fabrics. Inadequate movement amplitude increases warp end breakage rates across the entire loom width.
High mechanical loads on the back rest frame accelerate bearing wear over long production runs.
Defect Prevention
Quality control records track warp break frequency against mechanical roller displacement settings to establish ideal weaving conditions. Excessive oscillation amplitude causes loose warp ends, leading to mispicks and uneven beat-up density in finished linen cloth. Controlled back rest oscillation maintains uniform tension across the warp sheet during reed contact with the cloth fell.
Fabric grading reports confirm that stable back rest operation prevents structural stripiness and width variations.