Pneumatic Transport
Shuttleless weaving mechanisms propel single picks of linen yarn across a fabric shed using compressed air jets emitted from a primary nozzle and auxiliary relay nozzles. In high-speed weaving operations, airjet filling insertion relies on precise pneumatic pressure profiles to carry stiff flax fibers without causing yarn breakage or untwisting. The technique applies to fine spun linen counts up to specific density thresholds where air drag provides sufficient force.
Irregularities in flax yarn diameter restrict the maximum width attainable under standard air pressure settings, establishing an operational boundary for high-count fabrics.
Yarn Stress
Tensile forces exerted during pneumatic propulsion place sudden mechanical loads on spun linen yarns. Flax fibers possess low elasticity, which makes airjet filling insertion susceptible to pick stops whenever thick places or slubs pass through the main nozzle. Lowering air pressure reduces yarn breakages but increases the likelihood of incomplete insertion across wide reed widths.
Weaving sheds balance line pressure against yarn strength to maintain continuous operation.
Velocity Limit
Compressed air consumption per meter of inserted weft increases nonlinearly as loom speeds exceed standard operational thresholds. Excessive air velocity in airjet filling insertion causes filament separation in low-twist linen yarns, leading to loose fibers clogging the relay nozzles. Automated optical sensors monitor pick arrival times at the receiving side to trigger immediate loom shutdown upon insertion failure.