Structural Defect
Irregularities in spun strands that feature a diameter significantly below the average yarn thickness represent a common quality defect in textile manufacturing. These narrow segments, referred to as yarn thin places, are characterized by a lack of fibres in the cross-section. They represent the weakest points in the yarn structure and are highly susceptible to breaking under tension.
Drafting Instability
Uneven fibre movement within the drawing zone of the spinning frame is the primary source of these narrow segments. When drafting wet flax strands, if the drawing zone friction is too low or the roller pressure is uneven, short fibres can separate from the bundle too quickly, leaving a depleted section. These yarn thin places receive more twist than thicker zones during the spinning phase, becoming hard and inelastic.
Proper maintenance of the drafting rollers and aprons is necessary to minimize these defects.
Downstream Consequence
The presence of these weak segments can cause frequent yarn breakages during high-speed warping and weaving. Each break forces a loom stoppage to tie the broken ends, which introduces knots that degrade the appearance of the finished linen fabric. Buyers set strict limits on the number of these defects allowed per thousand meters of yarn.
By utilizing automatic yarn clearers to cut out these thin zones and splice the yarn, mills can guarantee a higher grade of export fabric, ensuring that the finished linen has the uniform strength and surface appearance required for high-end home textiles and apparel.