Material Failure
Material failure describes the insufficient decomposition of the pectin that binds flax fibers to the woody stem. When under-retting occurs, the biological or chemical process is halted before the fiber bundles are fully released from the straw. This condition results in a raw material that is difficult to process and contains high levels of bark and wood fragments.
Decortication Difficulty
Scutching machines cannot easily separate the fibers from the stem when the pectin remains intact. The under-retting leads to a higher percentage of tow and a lower yield of long line flax. These unreleased bundles are often stiff and greenish in color because the chlorophyll and other plant pigments have not been broken down by the retting microbes.
Fiber Quality
Spinning mills in China often reject lots that show signs of this defect because the hard shives can damage the fine needles of the hackling machines. The coarseness of the resulting fiber makes it impossible to spin the fine yarn counts required for premium linen apparel. Under-retting also affects the color.
This happens because residual lignin resists bleaching. In the field, farmers must monitor moisture and temperature levels to ensure the retting process reaches the optimal endpoint. If the straw is baled too early, the fiber quality is permanently degraded regardless of the subsequent mill treatments.
The strength of the flax is maintained but its utility in high quality textiles is severely limited.