Width Reduction
Dimensional textile changes that occur when the warp and weft yarns relax from their tensioned state on the loom to their finished dimensions determine the final width of the fabric. This change is measured as the total width contraction, which represents the combined effect of loom-state crimp contraction and wet relaxation during finishing. It dictates the width of the loom reed required to achieve the desired finished fabric width.
It is a critical factor in calculating the yield of a weaving run.
Process Contraction
Measuring the fabric as it is released from the loom and after it has undergone scour and wash treatments reveals the full extent of this dimensional change. The total width contraction in linen is often larger than in other fibers because flax has a high tendency to crimp and shrink during wet processes. This contraction is driven by the release of mechanical stresses locked into the yarn during spinning and weaving.
If a mill fails to compensate for this contraction when choosing the reed width, the finished linen will be too narrow, violating the customer’s purchase specification. Technologists must therefore calculate this shrinkage for each specific weave structure.
Calculation Guide
Subtracting the finished width from the reed width and dividing by the reed width gives the contraction percentage. This calculation allows mills to purchase yarn and select reeds with high accuracy. Proper planning prevents waste and ensures that finished shipments meet the required dimensions.