Structural Density
Structural fabric measurements that specify the number of warp ends and weft picks per unit length before any finishing or wet treatment define the raw state of a woven textile. The count of these threads per unit of measure is called the grey sett, which serves to establish the basic density of the loom-state linen fabric. It dictates the raw material consumption and represents the primary guide for the weaver.
This measurement excludes the contraction and shrinkage that occur during subsequent scouring and bleaching.
Width Calculation
Determining the thread density at the loom stage requires accounting for the tension of the warp and weft during the weaving process. The grey sett represents the configuration of the yarns while they are under tension from the loom beam. When the fabric is released from the loom, the relaxation of the yarns alters these numbers.
In flax processing, mills must calculate this initial density with high precision because linen yarns contract substantially during wet finishing. An incorrect initial density results in a finished fabric that fails to meet the buyer’s specification for weight and pick count.
Production Setting
Comparing the off-loom density with the finished specification allows the technologist to adjust the reed selection. This process ensures that the finished cloth has the correct thread count. Woven linen quality depends on this initial measurement.