Temperature Gradient
Heat layering in stagnant or poorly mixed liquid vessels forms distinct temperature zones along vertical depth profiles. In flax retting vats, wet-spinning immersion troughs and fabric dyeing vessels, thermal stratification produces uneven fluid temperatures between upper and lower tank regions. Warm liquid rises toward the surface while cooler, denser fluid settles at the vessel floor.
Process control logs document multi-point sensor readings across vertical tank axes to monitor fluid homogeneity. Temperature gradients cause localized variation in retting speed, pectin softening and dye exhaustion across processed linen materials.
Convective Circulation
Density differences drive natural thermal segregation inside large wet-processing equipment unless mechanical agitation disrupts fluid layers. In flax retting tanks, bottom layers remain cooler than surface regions, slowing bacterial action on submerged straw bundles near the floor. Unequal retting rates produce fibre color variations and uneven strength profiles within single production batches.
Within wet spinning troughs, thermal layering alters hot water penetration into moving roving strands, resulting in draft variability across spinning positions. Recirculation pumps, eductor nozzles and mechanical stirrers disrupt thermal layers by inducing forced convection throughout the liquid volume. Mill operating procedures require verification of fluid movement patterns before initiating thermal cycles.
Process Variation
Non-uniform thermal distribution during fabric dyeing causes shading defects and listing along exported linen rolls. Fabric passing through cooler trough zones absorbs lower dye concentrations than fabric exposed to warm upper layers. Continuous thermal mapping ensures batch consistency and compliance with buyer color tolerance specifications.