Material Loss
Fabric finishing generates edge discards that must be separated from the primary roll during the final slitting stage. The stenter trim waste arises from the needles or clips of the drying machine that grip the selvages of the damp linen fabric to pull it to the correct width. This material is cut away by rotating blades because it contains pinholes and chemical buildup that make it unusable in finished garments.
It represents a constant material loss that must be factored into the overall production yield.
Operational Efficiency
Mechanical adjustments to the machine’s width settings and the pinning mechanism are made to reduce the width of the discarded edge to the minimum possible dimension. If the pins are set too far in, the width of the stenter trim waste increases, which reduces the usable width of the finished fabric and increases the waste percentage. Spun linen fibers are expensive, meaning that any reduction in waste directly improves the margin of the finishing operation.
The discarded strips are collected automatically by vacuum extraction systems and compacted into bales for recycling into industrial felt or paper pulp. This recycling process partially recovers the value of the raw fiber and reduces the waste footprint of the finishing mill.
Process Improvement
Waste logs are kept at the slitting machine to track the percentage of material lost during each production run. A sudden increase in the waste volume suggests a misalignment of the pinning chain. This monitoring ensures that the stenter operates at maximum efficiency.