Defect Formation
Visible density variations occurring after a loom stoppage can ruin the appearance of high-quality textiles. A start-up mark defect is a localized band of uneven weft density that forms when the loom resumes operation after a break. In linen cloth production, the high tension and low elasticity of flax warp yarns make them prone to creep during a stoppage.
When the loom starts again, the first few picks may be beaten in too closely or too far apart, leaving a bright or dark bar across the fabric. This defect is highly visible in linen due to its open structure and natural fiber variations.
Loom Dynamics
Creep in the warp yarn during downtime reduces the tension of the warp sheets and changes the fell position of the cloth. During the first few cycles after restart, the warp let-off and cloth take-up mechanisms must compensate for this tension loss. If the loom is not equipped with start-up mark prevention systems, the reed will beat the weft to an incorrect position.
These automated systems adjust the fell position by reversing or advancing the warp beam slightly before the first pick is inserted.
Inspection Process
Quality inspectors classify these defects as major or minor depending on their visibility in the finished fabric. Severe start-up marks require the fabric to be graded as second-choice, which reduces the market value of the roll. Preventing this defect is therefore a major priority for factories producing linen fabrics for fine apparel.
Modern electronic looms have minimized this issue through precision motor control.