Loom Tension
Mechanical instability along the outer edges of a power loom creates recurring ruptures in the warp yarns. Selvedge end breakage occurs when the tensioning mechanisms on the side frames fail to compensate for the higher density of the border weave compared to the central cloth body. Regular monitoring of these specific positions during the weaving of linen fabrics prevents significant damage to the final bolt.
Edge Calibration
Maintenance teams adjust the spring loaded tensioners to align with the specific mass of the flax yarn. Precise weighting ensures that the outer yarns maintain synchronous movement with the main shed. Improper settings cause the yarn to rub against the metal reed teeth, which increases the likelihood of a snap under high speed operation.
When the frequency of these snaps exceeds the allowance set by the mill quality manual, the machine stops to protect the uniformity of the selvedge.
Quality Protocol
Textile inspectors record these events in the fabric inspection report to categorize the grade of the linen output. Each defect found at the border reduces the overall market value of the roll because of the risk of fraying during subsequent finishing operations. Buyers establish strict thresholds for these occurrences, as excessive breaks indicate poor control of the environmental humidity or a faulty loom setup that degrades the structural integrity of the fabric.