Contact Zone
Compressive contact points between two parallel rotating cylinders generate the pressure needed to draft fiber slivers or extract excess moisture. The roller nip acts as the primary boundary that grips and guides the flax fibers through successive stages of the drawing frame. This pressure zone ensures that the fibers are held firmly as they are drawn out to achieve the desired linear density.
Operators record the load settings of these contact zones on the mill machine parameter sheet.
Fiber Control
Drafting operations require consistent pressure at each roller nip to prevent the uncontrolled slippage of shorter flax fibers. If the pressure at this junction is uneven, the flax fibers group together into slubs, resulting in variable yarn thickness. By adjusting the load on the top roller, technicians ensure the fibers are drafted one by one rather than in thick clumps.
This control is critical for wet spinning, where water acts as a lubricant and increases the risk of fiber slippage within the drafting zone.
Moisture Extraction
Finishing processes use high-pressure roller systems to squeeze liquid from wet-treated linen fabrics. The roller nip removes excess chemical treatments and water before the fabric enters the drying ovens. This extraction process is recorded on the chemical treatment batch card.