Weft Insertion
High-speed air-jet weaving of linen yarn relies on a sequence of pressurized air streams to carry the weft thread across the fabric width. Optimization of relay nozzle dynamics ensures that the yarn is transported smoothly without losing tension or suffering abrasion. This mechanical adjustment is recorded on the loom setup card to maintain the correct insertion speed for each specific yarn count.
The system uses a main nozzle for initial acceleration and multiple auxiliary nozzles across the reed to sustain the yarn path.
Aerodynamic Flow
Precise coordination of the air pulses prevents the linen yarn from buckle or loop formation during its passage. When relay nozzle dynamics are properly calibrated, each nozzle opens shortly before the yarn tip arrives and closes immediately after it passes. This sequential blowing minimizes compressed air consumption while maintaining a stable velocity field.
If the timing is misaligned, the weft yarn may stall, causing a warp stop and creating defects in the woven cloth. The air pressure values are logged in the daily energy utilization report, allowing technicians to audit the pneumatic efficiency of the entire weaving floor.
Operational Control
Linen yarn is heavier and more irregular than cotton, requiring higher air pressures and longer blowing times. If relay nozzle dynamics are not adjusted for these material characteristics, the high air velocity can cause the yarn to untwist. This boundary is monitored through the loom efficiency sheet that tracks the filling stops.
The technician must adjust the valve timing for each yarn lot.