Width Derivation
Mathematical loom allocation formulas determine the total drawn-in reed width required to achieve a specified greige cloth width after accounting for yarn crimp and lateral relaxation. Textile engineers perform reed spread calculation before mounting a new warp beam onto a rapier or projectile loom. The formula governs the distribution of warp ends across the steel dents of the reed to control finished cloth density and selvage stability.
Calculation applies strictly to the on-loom warp geometry before fabric fell take-up.
Contraction Adjustment
Loom preparation technicians multiply the target greige fabric width by empirical shrinkage and crimp factors to derive total reed spread. Linen warps contract significantly in width immediately after exiting the reed due to filling yarn interlacement and natural bast stiffness. The calculation incorporates reed dent count, total warp ends, ends drawn per dent, and allowance for selvage constructions.
Engineers record computed widths on the loom mounting specification sheet. In Chinese linen production plants, floor managers check measured reed widths against calculated targets using steel rules before engaging the main drive motor. Accurate width allocation prevents selvage binding and excessive temple pull marks.
Miscalculated reed allocations produce uneven warp density across the cloth face.
Density Threshold
Fabric structure specifications define the operational boundary of dent spacing on running looms. Errors in reed spread calculation cause fabric rejections when finished goods deviate from contract warp density standards. Buyer acceptance criteria reject export bolts that show off-gauge widths or irregular pick lines caused by jammed reed dents.
Mill internal standards require recalculation whenever yarn count or crimp ratio shifts between yarn supply lots. Calculation utility ends once the reed is set and loom operation commences.