Mechanical Fibre Stripping Operation
Mechanical extraction processes separate bast fibre ribbons from the woody core and epidermis of green plant stalks. Applied to Boehmeria nivea crops, ramie decortication strips the valuable cortical layers while preserving continuous filament bundles for industrial processing. Unlike flax or hemp, ramie cannot undergo biological field retting due to high gum contents that cause rapid fibre rot before separation occurs.
Decorticator machines employ rotating fluted rollers and high-speed beater blades that crush the brittle interior woody xylem while scraping away outer bark layers. The extracted ribbons emerge wet and coated in sticky hemicellulose and pectin complexes. The mechanical operation terminates where chemical processing starts, leaving the degumming stage to strip non-cellulosic encrustations.
Degumming Feedstock Preparation
Extraction efficiency governs the physical cleanliness and chemical accessibility of the resulting raw ramie ribbons. Insufficient scraping leaves residual woody shives bonded to the ribbon surface, which consumes excessive sodium hydroxide during industrial degumming boils. Aggressive mechanical impact fractures the long individual fibres, lowering mean staple length and producing waste tow during subsequent carding.
Processing fresh green stems within hours of harvest yields cleaner ribbons than decorticating dried stalks, because hardened plant gums resist mechanical peeling. Mills in southern manufacturing hubs grade decorticated material based on bark remnants and residual shive content before allocating lots to chemical cooking kiers.
Mill Acceptance Grading Certificate
Raw ribbon quality is graded upon mill arrival according to physical cleanliness criteria documented on an incoming inspection certificate. Inspectors extract representative grab samples from pressed bales, evaluating shive content, colour uniformity and ribbon length. Laboratory technicians boil sample swatches in standardised alkali solutions to determine gum content, which typically ranges from twenty to thirty percent of bone-dry ribbon mass.
The resulting inspection sheet classifies the raw ramie into commercial grades based on residual core content and mechanical fiber damage. Buyer acceptance clauses mandate that uncleaned bark fragments remain below two percent by weight to avoid equipment clogging in mechanical combing machines. Excessive woody core fragments surviving decortication lead to dark slubs in fine blended yarns.
Well-decorticated ramie ribbon provides the foundation for uniform degumming, smooth drafting and high yarn tenacity in pure and blended woven textiles.