High Speed Separation
High-speed actuation for yarn separation is required in winding machines to remove identified defects quickly. A piezo cutting unit utilizes the rapid deformation of piezoelectric crystals under electric voltage to drive a cutting blade across the yarn path. This mechanism operates much faster than traditional electromagnetic cutters, making it suitable for modern winding machines running at high yarn speeds.
Because linen yarns have high tensile strength, the cutter must apply a decisive and sharp action to ensure a clean cut. The unit is mounted directly within the yarn clearer housing to minimize the delay between defect detection and cutting.
Cutter Operation
Electric voltage applied to the ceramic elements causes them to expand instantly and drive the blade forward. This rapid response allows the piezo cutting unit to sever the yarn precisely at the boundary of the defect, reducing yarn waste. The blade returns to its home position immediately after the pulse ends, preparing for the next action.
This fast cycle time is necessary for maintaining high productivity in spinning mills.
Maintenance Needs
Linen spinning generates high amounts of abrasive flax dust that can accumulate inside mechanical housings. Regular cleaning is necessary to prevent this dust from clogging the cutting blade and slowing down the actuation time. If the blade becomes blunt or blocked, the yarn may be only partially severed, causing winding errors.
This component is therefore designed for easy access during routine machine maintenance.