Surface Characterization
Non-contact measurement of surface micro-topography using light wave interference or focus detection defines a principal methodology in advanced materials metrology. The textile sector applies optical profilometry to examine the surface roughness of flax fibres and spinning guides at a microscopic scale. This analysis helps engineers understand how surface friction affects the wear rate of critical spinning components.
Topographical Metrology
The instrument works by directing a light beam through an interferometer or focusing lens onto the surface of the fibre or guide. As the sensor scans across the test area, it measures the vertical height variations with sub-nanometre resolution to generate a three-dimensional map of the surface. From this data, software calculates the arithmetic average of the roughness and the peak-to-valley heights.
For flax fibres, these measurements reveal the distribution of surface waxes and the physical changes caused by scouring or bleaching. Because the test is entirely non-contact, it avoids deforming the soft organic structures of the bast fibres, which would occur with a mechanical stylus.
Spinning Evaluation
Mills use these surface maps to evaluate the wear patterns on ceramic guides after long production runs. A guide that exhibits excessive micro-grooves is replaced before it can cause surface damage or tension fluctuations in the spinning yarn.