Thermal Airflow
Atmospheric heating variations generate density differences that drive convective currents through a porous material or enclosure. This movement, known as non-isothermal airflow, occurs during the stenter drying process where hot air is blown through wet linen fabric to set its width. The resulting temperature gradients across the fabric width are recorded to ensure uniform drying.
Drying Uniformity
Multi-zone drying ovens in Chinese linen mills use high-speed air nozzles to dry the moving fabric web. This non-isothermal airflow must be carefully balanced to prevent the edges of the linen fabric from drying faster than the center, which would cause uneven shrinkage. The mill’s quality assurance team monitors the fabric temperature profile and records the data on the stenter log sheet.
Uneven shrinkage can result in fabric distortion that fails the dimensional stability test during buyer inspection. Adjusting the air velocity and temperature in each zone keeps the fabric within the required width tolerances.
Velocity Balance
Excessive air velocity on one side of the stenter can create localized cold spots due to rapid evaporation. This variation in the drying rate alters the fabric density and affects the final finish of the linen cloth. Operators balance the exhaust fans to maintain a symmetric airflow pattern across the chamber.