Commercial Allowance Reduction
Contractual weight adjustments reduce payable lot mass based on the measured percentage of shive, soil particles, residual gums and extraneous matter present in raw flax fiber shipments. Applying non fibrous impurity deduction protects mill buyers from paying raw fibre prices for non-textile waste included in unhackled flax bales. Commercial contracts between European fibre exporters and Chinese spinning mills establish standard impurity baselines, typically set at two percent by dry weight.
The calculation boundary applies strictly to removable non-cellulosic impurities verified through standardized solvent extraction and mechanical shive separation tests.
Laboratory Extraction Testing
Representative sample scutching and chemical boiling quantify non-fibrous content before bulk invoice settlement. Laboratory technicians weigh initial raw fibre samples, perform boiling-off cycles in dilute sodium hydroxide solutions, and dry residual clean cellulose to constant mass. Subtracting clean fibre weight and natural moisture allowance from total sample mass yields the exact non-fibrous impurity percentage.
Testing reports document shive content and soluble extractables separately to identify whether excessive weight stems from poor retting or high soil contamination.
Settlement Invoice Modification
Verified impurity percentages exceeding standard contract allowances generate automatic financial deductions against total shipped weight. Accounts payable departments calculate final payment by reducing net invoice weight by the exact excess impurity percentage recorded on official inspection certificates.