Tension Control
Shedding mechanism components in jacquard machines must return the harness cords to their lowest position rapidly to prepare for the next pick. The tensioning components known as lingo springs provide the required downward force using coiled metal tension elements rather than relying solely on the gravity of traditional lead weights. This substitution allows looms to operate at much higher speeds without harness flutter.
It is particularly important when producing fine linen fabrics where high warp tension is required to ensure a clean shed opening. The springs are mounted below the comber board and connected directly to the lower end of each heddle.
Kinematic Performance
Dynamic tension profiles during the loom cycle must remain uniform to prevent uneven yarn stresses and warp breaks. With lingo springs, the returning force increases as the heddle is raised to its highest position, which assists the mechanical drive during the initiation of the downward stroke. This variable force profile helps to damp out the high-frequency vibrations that often occur in the harness assembly at speeds above seven hundred cycles per minute.
The reduced vibration minimizes the friction between the warp yarns and the heddle eyes, preventing the surface abrasion of the flax fibers during the manufacturing process.
Fatigue Boundary
Mechanical fatigue defines the operational lifespan of these tensioning components. After millions of extension cycles, the spring rate of individual lingo springs will begin to degrade, leading to uneven shed openings. This condition requires a complete replacement of the spring harness assembly.