Standard Procedure
International testing standards for interlaced textiles determine the correct method for measuring the mass per unit area of a fabric. The ISO 3801 grammage test prescribes two distinct methods, either weighing a full roll or analyzing small cut specimens of specific dimensions. This measurement establishes the baseline density that buyers use to verify that they have received the correct quality of linen.
It represents the most common specification used in export contracts.
Conditioning Requirement
Accurate measurement depends on the conditioning of the fabric in a standard atmosphere before weighing occurs. Linen holds a high natural moisture content that varies with ambient humidity, which can distort the weight of the fabric if not controlled. Testing under the ISO 3801 grammage standard requires the textile to be conditioned at sixty-five percent relative humidity and twenty degrees Celsius until it reaches a constant mass.
This prevents the shipment of dry fabric that later absorbs moisture and exceeds the weight specification during customs inspection. The final calculated mass is expressed in grams per square meter, which provides a standard value that can be compared across different production lots.
Verification Protocol
Laboratory reports generated from these tests are included in the quality documentation sent to the purchasing office. Fabric that falls below the specified weight is rejected due to lack of structural strength. This test remains the legal foundation for settling trade disputes regarding fabric weight.