Parallel Control
Drafting machinery with dual, opposed pin beds controls the flow of long staple fibers during the drawing and blending stages of sliver preparation. In flax processing, the intersecting gill prevents the uncontrolled movement of fibers as they are drafted between the feed and drafting rollers. Technical sheets for mill layouts record the pin density and faller speeds of these machines to optimize sliver alignment before spinning.
Alignment Efficiency
Penetration of the sliver by faller pins from both top and bottom directions ensures maximum control over the bast fiber bundles. This dual action is necessary for flax because the natural fibers are long and have high friction coefficients. If the sliver passes through without sufficient pin control, it undergoes drafting waves that cause periodic thin and thick spots.
The mechanical action aligns the fibers in a parallel fashion, which increases the strength of the resulting yarn and prevents breaks on the spinning frame.
Machine Limitation
Faller bar speed limits the throughput of these preparation lines. If the machine runs too fast, the pins can damage the delicate flax fibers, which decreases the average fiber length and increases waste. Proper lubrication and pin maintenance are required to avoid heat buildup during high-speed production runs.