Solvent Processing
Analytical laboratory procedures utilize non-polar solvents to isolate the specific wax components found on the surface of the flax fibre. Employment of hexane extraction is a standard technique for quantifying the amount of surface-level lipids that are not chemically bound to the cellulose. This method targets the most easily accessible fats, providing a different profile than stronger solvents like dichloromethane.
It is particularly useful for determining the waxiness of raw flax before it enters the carding room.
Testing Sequence
Immersion of the flax sample in the solvent for a fixed duration allows the surface waxes to dissolve into the liquid phase. After the hexane extraction is complete, the solvent is filtered to remove any loose particulate matter like dust or small fibre fragments. The liquid is then heated to evaporate the hexane, leaving behind a residue of pure lipids.
Mill workers use the weight of this residue to calculate the lipid content as a percentage of the original sample mass. This procedure is repeated for every new lot of raw material to ensure uniformity in the processing line.
Industry Application
Data derived from this testing informs the selection of detergents and temperatures for the scouring process. Because hexane extraction specifically measures the waxes that cause the most resistance to wetting, it is a useful predictor of scouring efficiency. Mills in major production hubs use this information to optimize their water usage and chemical costs.
The resulting values are recorded in the technical data sheet for the fibre lot.