Shed Opening
Harness motion parameters define the vertical displacement distance of heald frames required to create a clear shuttle path. Dobby mechanisms lift designated shaft frames to separate warp ends into upper and lower shed lines. Heald frame lift measures the vertical movement distance traveled by a heald frame from its lowest shed position to its highest apex.
Weaving room specification sheets detail lift settings for each harness frame in a dobby harness draft. Accurate vertical displacement ensures unobstructed insertion of weft yarn during high-speed weaving.
Mechanical Displacement
Drive levers, jacks, and connecting rods translate rotation into linear vertical movement of individual frame structures. Front heald frames require less vertical lift distance than rear frames to achieve the same shed angle for weft insertion. Coarse linen yarns with protruding surface fibers demand larger shed openings to prevent thread cling and yarn entanglements.
Excessive frame movement increases tension on warp yarns and accelerates mechanical wear on harness cords and guides. Insufficient lift causes shuttle or insertion element collisions with warp yarns, creating mispicks and severe yarn damage. Adjusting drive rod mounting points on dobby levers alters frame displacement to match specific fabric constructions.
Modern high-speed looms utilize electronic dobby controls to adjust individual frame timing and stroke height.
Clearance Calibration
Fabric inspection records document weave clarity and warp abrasion marks to evaluate shed height settings. Incorrect heald frame lift produces incomplete shed opening, resulting in missed picks and float defects in linen fabrics. Calibration protocols establish precise lift values for each frame position based on loom geometry and yarn diameter.
Buyer compliance reports reject linen shipments showing repeated float defects caused by incorrect frame lift depth.